WATERPROOFING

Vehicular & Pedestrian Traffic Surfaces

• Sonneborn Tuff-Trac® :: a water-based VOC-free, slip-resistant acrylic coating for asphalt and concrete.
• Sonneborn Sonoguard Systems :: are composed of: Sonoguard® Base Coat, a one-component, moisture-curing polyurethane, Sonoguard® Top Coat, a one-component aliphatic moisture-curing polyurethane, and Sonoguard® Top Coat Tint Base.
• Sonneborn Conipur II Deck Coating Systems :: a fluid-applied polyurethane waterproofing coating.
• Polytuff Flexideck™ E-WD :: for plywood & concrete decks :: a liquid applied, high solids, water catalyzed polyurethane, waterproof Pedestrian Deck System.
• Polytuff Flexideck™ E-MD :: for marine & metal decks :: a liquid applied, water catalyzed, polyurethane, pedestrian traffic system for maritime decks and other metal surfaces.
• Polytuff Flexideck™ E-ML :: heavy duty metal lath :: a fluid applied, reinforced, polyurethane, water-catalyzed, waterproof decking system incorporating a E-Tuff® Sand Slurry mixture installed over mechanically fastened metal lath, in combination with a top coating membrane.
• Polytuff Flexideck™ P-A/P-B :: fire rated systems :: a fluid-applied water-catalyzed, waterproof urethane decking system.
• Polytuff Flexideck™ P-WD :: pedestrian deck systems :: a liquid applied, high solids, water catalyzed polyurethane, waterproof Pedestrian Deck System.
• Excelcoat Pedestrian Traffic Systems :: A three-step, fiberglass-reinforced, acrylic deck coating system designed for waterproofing deck surfaces.
• Excelcoat Fire System :: A "Class A", one-hour fire rated, acrylic deck coating system designed to provide a waterproof wearing surface for areas exposed to pedestrian traffic.
• Excelcoat KD Systems :: A decorative latex modified cementitious coating that includes a base coat and texture coat, topped with an acrylic sealer.

Foundation & Split Slab Applications

• Sonneborn Hydrocide® 600/700 :: Cold-applied water-based emulsified-asphalt dampproofing and vapor-retarding coatings for use on "green" or slightly damp surfaces.
• Sonneborn HLM 5000® :: a one-component, moisture-curing, bitumen-modified polyurethane elastomeric waterproofing membrane for exterior below-grade or between-slab applications.
• Sonnoshield® DBS 2000/6000/6200/9000 :: constitute a series of polypropylene drain board systems.
• Bakor Polybitume® 570-05 :: polymer modified sealing compound is a high-quality, high solids, rubber asphalt caulking and saeling compound formulated to provide extra flexibility and good bond.
• CIM 800 Membranes :: Below Grade/Roofing. Two-component systems that form a seamless, tough elastomeric coating.
• CIM 1000 Membranes :: Wastewater/Chemical Containment. Two-component systems that form a seamless, tough elastomeric coating.

Cementitious Waterproofing

• Sonneborn Waterproofing
• Thoroseal Foundation Coating :: a Portland-cement-based waterproof coating for exterior below-grade concrete and masonry.
• Anti-Hydro® Waterproof Cement Coat :: An admixture for hydrolithic (cement coating) waterproofing exterior and interior, above and below grade, concrete and masonry surfaces.
• Anti-Hydro® Hydroseal :: Complete, easy-to-use cement coat hydrolithic water-proofing system that has been widely used to waterproof and protect concrete and masonry surfaces.
• Anti-Hydro® Hydrocap :: A crystalline waterproofing system used for capillary or crystalline waterproofing of below-grade concrete and masonry. Slurry and "shake-on" applied.

• Aquafin Mortar-IC :: Fast setting crystalline waterproof. Repair & Sealing Mortar
• Aquafin Mortar-LN :: Waterproof Cementitious Repair & Lining Mortar
• Aquafin Mortar-40 :: One-component, Cementitious Structural Repair Mortar
• Aquafin Mortar-CA :: Highly Corrosion Resistant Cementitious Liner, calcium aluminate formulation

Decorative Waterproof Coatings

• Mastertop 580/585/590/595 :: for waterproofing applications the base coat must be Mastertop® 590 DC or Mastertop® 550i.
• Sonoshield® 580 DC :: a cementitious coating specifically formulated to increase bonding adhesion for Sonoshield® 595 DC, 590 DC, and 585 DC. It can be used as the background or grout line color for each system.
• Sonoshield® 590 DC :: a one-component polymer-modified cementitious coating used to protect and beautify concrete, mortar, or masonry.
• Sonoshield® 595 DC :: a two-component polymer-modified cementitious coating used to protect and beautify concrete, mortar, and masonry. It should be used only as a topcoat with a base coat of Sonoshield® 590 DC, Sonoshield® 580 DC, or Masterseal® 550i.(For waterproofing applications the base coat must be Mastertop® 590 DC or Mastertop® 550i.)
• Excelcoat Pedestrian Traffic Systems :: A three-step, fiberglass-reinforced, acrylic deck coating system designed for waterproofing deck surfaces.
• Excelcoat Fire System :: A "Class A", one-hour fire rated, acrylic deck coating system designed to provide a waterproof wearing surface for areas exposed to pedestrian traffic.
• Excelcoat KD Systems :: A decorative latex modified cementitious coating that includes a base coat and texture coat, topped with an acrylic sealer.

Containment Coatings

• Aquafin VaporTight® SG2 Epoxy :: Surface-applied Vapor / Oil Barrier Coating, Reduces Water-Vapor Emissions of up to 25 lbs to 3 lbs or less
• CIM 800 :: Below Grade/Roofing. Two-component systems that form a seamless, tough elastomeric coating.
• CIM 1000 :: A liquid applied urethane coating forms a tough elastomeric liner that adheres to most substrates. Chemical and abrasion resistant barrier for waterproofing, corrosion protection, and containment of water and most aqueous chemicals.
• CIM 1000TG :: A tough, liquid-applied, two-component, chemical and corrosion resistant urethane elastomer coating, chemically thickened to allow trowel applications with minimum sag.
• CIM 1061 Potable Water Containment :: A tough, abrasion, corrosion and chemical resistant, fluid-applied liner for use in water and wastewater applications including those requiring ANSI/NSF 61 potable water certification.
• CIM 2000 :: The gray color coating contains no asphalt and is completely solvent free. ANSI/NSF 61 approved for potable water contact

JOINT SEALANTS

Vertical Expansion Joints

• Sonolastic® TX1 :: a one-component, texturized, moisture-curing, gun-grade poly-urethane sealant.
• Sonneborne Ultra :: a one-component, moisture-curing, aliphatic, nonsag, polyurethane sealant for security and institutional uses requiring elasticity and superior color integrity.
• Sonneborne NP1™ :: a one-component, high-performance, nonpriming, gun-grade, elastomeric polyurethane sealant.
• Sonolastic® 150 & VLM Technology :: a premium, very low-modulus, high-movement, nonsag, fast-curing, ready-to-use, silyl-terminated polyether sealant.
• Sonneborne NP2™ :: a three-component, highly flexible, nonpriming, high-performance polyurethane sealant.
• Pecora Dynatrol™ IIXL :: General Purpose Polyurethane Sealant
• Pecora Dynatrol™ II :: General Purpose Polyurethane Sealant
• Pecora Polysulfide Sealant ::
• Pecora 864 Architectural Silicone :: Architectural Silicone Sealant
• Pecora 890 Low Mode Structural Silicone :: Ultra Low-Modulus Silicone Sealant
• Pecora Silspan Preformed Silicone Profile Seal :: Preformed Silicone Profile Seals
• GE Silpruf® NB SC9000 Silicone Sealant :: a one-part, neutral cure, medium modulus, matte-finish silicone sealant for use in weather-proofing applications.
• GE Silpruf® SCS 2000 Low Mod Silicone :: a one-part silicone sealant for use in most common weatherproofing applications on a wide variety of materials.
• GE Construction SC1200 Silicone :: Contractors® 1000 Series silicone adhesive sealants are one-part sealants that offer excellent adhesion, weatherability and elasticity for general glazing and sealing applications.
• GE SWS Silicone Weatherproofing Sealant :: SWS weatherproofing is a single-component, neutral cure silicone which is an excellent candidate for use in new or remedial weathersealing applications.
• GE Silspan Preformed Silicone Profile Seal ::

Industrial Flooring

• Epolith®-P & Epolith®-G :: Are two-part 100% solids epoxy joint fillers. Self-leveling Epolith®-P provides an abrasion- and puncture-resistant seal suitable for high-traffic horizontal joints. Gun-grade Epolith®-G provides a pick-and puncture-resistant seal for sloped and vertical joints.
• TF 100 :: a two-component self-leveling 100% solids polyurea control joint filler designed to protect joints in industrial concrete floors subject to hard wheels and heavy loads.

Parking Deck & Sidewalk Joints

• Sonolastic SL1™ :: a one-component nonpriming, self-leveling elastomeric polyurethane designed for expansion joints in concrete floors and decks.
• Sonolastic SL2™ :: a multi-component, self-leveling, elastomeric polyurethane sealant that is mixed and poured in place.

Glazing & Sanitary

• Sonneborn Omniseal™ 50 :: a ready-to-use medium-modulus, neutral-cure silicone construction sealant. It forms a bond to many substrates without a primer.

Firestopping

• Pecora ELS Firestop ::
• Pecora ILS Intumescent Heat Expandable Firestop ::

Adhesives

• Sonneborn® Premium Adhesive :: a high-strength, high-solids, low-VOC polyurethane adhesive that is 3 times stronger than conventional adhesives.

Back Up Materials

• Sonolastic® Closed-Cell Backer-Rod :: is a closed-cell, polyethylene foam joint-filler and backing for elastomeric sealants. Its resilience accommodates dynamic joints.
• Sonolastic® Soft Backer-Rod :: is a reticulated closed-cell polyethylene foam joint-filler and backing for sealants. It compresses easily to accommodating joints of varying widths.

Primers

• Sonnolastic® Primer 733/766 :: Primer 733 is a quick-drying solvent-based primer for priming joints and substrates before application of Sonolastic® NP 1™, TX 1, NP 2™, Ultra, SL 1™, SL 2™, and Sonolastic® 150 series sealants. Primer 766 is a high-solids, low-VOC solvent-based primer for priming joints and substrates before application of Sonolastic® NP 1™, TX 1, NP 2™, and Ultra sealants.
• Sonnolastic® Primer 2000 :: a quickdrying solvent-based primer for Sonneborn's line of silyl-terminatedpolyether sealants, Sonolastic® 150 and Sonolastic® 150 Tint Base.
• Pecora P75 Primer :: Film forming primer for use with urethane based sealant on porous surfaces.
• Pecora P100 :: Fast drying general purpose sealant primer.
• Pecora P120 :: Surface modifying primer for use with silicone and urethane based sealants on non-porous surfaces.

ROOF MEMBRANES

• SRP Roofshield :: a 3-ply spun bonded polypropylene fabric that is used as a breathing underlay for sloped roofs. It is waterproof, U.V. stabilized, rot proof & tear resistant.
• SRP Wallshield is a 3-ply spun bonded polypropylene fabric that is used as a breathing underlayment for rain screen walls. It is waterproof, U.V. stabilized, rot proof and tear resistant.
• Airout Shield