CURES & SURFACE TREATMENTS

Curing Compounds :: Water Based

• Sonneborn Kure-N-Seal WB :: Kure-N-Seal™ WB is a waterborne, acrylic, 15% solids, and transparent curing, sealing, and dustproofing compound.
• Sonneborn Kure-N-Seal :: Kure-N-Seal™ is a transparent, sprayable, acrylic-based polymer solution that cures, seals, and dustproofs.
• Masterkure 200 W :: Masterkure® 200W is a water-based polymer and wax-emulsion curing and sealing compound.

Curing Compounds :: Solvent Based

• Sonneborn Kure-N-Seal 25 :: Kure-N-Seal™ 25 LV is a transparent, low-viscosity, 25% solids, VOC-compliant, and solvent-based acrylic curing, sealing, and dustproofing compound designed for better application at cool temperatures.
• Sonneborn Kure-N-Seal 30 :: Kure-N-Seal™ 30 is a transparent, 30% solids, solvent-based, acrylic curing membrane.
• Mastertop® 110 Plus Underlayment :: a self-leveling poured-in-place cementitious nonstructural floor underlayment. It is used over precast and cast-in-place concrete floors.

Liquid Surface Treatments

• Sonneborn Cast Off® :: Cast-Off® is a solvent-based, VOC-compliant, nonstaining form-release agent.
• Sonneborn Sonosil :: Sonosil® is a clear water-soluble, sodium-silicate-based hardening and dustproofing compound.
• Sonneborn Lapidolith :: Lapidolith® is a magnesium-flurosilicate concrete hardener and dustproofer that bonds chemically with concrete to strengthen and harden.
• Sonneborn Citrus Degreaser & Cleaner :: Citrus Degreaser and Cleaner is a nonpetroleum-based product used to remove grease and stains from concrete.
• Aquafin IC Crystaline Waterproofing :: state-of the art one-component, penetrating cementitious material which waterproofs and protects new or old structurally sound concrete or concrete masonry in-depth. It resists strong hydrostatic pressure and is not a vapor barrier (lets concrete "breathe").

Concrete Finishes

• Mastertop Topping :: Mastertop® Topping 112 is a polymer-modified cement-based topping.
• Mastertop Anvil Top :: Mastertop® Anvil-Top® 300 is a cement-based metallic-aggregate floor topping.

GROUTING

Cementitious Grouts

• Sonneborn Set Grout :: Set® 45 is a one-component magnesium phosphate-based patching and repair mortar.
• Sonneborn Construction Grout :: Construction Grout is a noncatalyzed, multi-purpose construction grout containing mineral aggregate.
• Masterflow 928 :: Masterflow® 928 grout is a hydraulic cement-based mineral-aggregate grout with an extended working time.
• Sonnopost
• Sonneborn 14K HY Flow

Epoxy Grouts

• Masterflow MP :: Masterflow® MP grout is a three-component epoxy grout. It is used for anchoring bolts and rebar, for baseplate support,
• Masterflow 648/CP/CP Plus :: Masterflow® 648 CP is a high-performance epoxy grouting material for support of heavy equipment. Masterflow® 648 CP Plus grout is three-component modified epoxy-resin-based grout with variable fill rates.

UNDERLAYMENTS

• Mastertop 110 :: Mastertop® 110 Plus Underlayment is a self-leveling poured-in-place cementitious nonstructural floor underlayment.
• Sonnoflow

CONCRETE REPAIR

Water Intrusion

• Emaco® Plug :: Emaco® Plug is a cement-based water-stop mortar. It will stop running and seeping water through cracks in concrete under hydrostatic pressure.
• Emaco® 503 :: a fast-setting hydraulic-cement mortar that stops flowing water through holes and cracks in concrete and masonry surfaces.
• Aquafin Mortar-LN :: Waterproof Cementitious Repair & Lining Mortar
• Aquafin Mortar-40 :: One-component, Cementitious Structural Repair Mortar
• Aquafin Mortar-CA :: Highly Corrosion Resistant Cementitious Liner - calcium aluminate formulation

Crack Repair

• Sonneborn Epofil/Epofil SLV :: EpoFil™ is a high-modulus, low-viscosity epoxy injection resin and sealer used for high-strength bonding of cracks. EpoFil™ SLV is a high-modulus, super-low-viscosity epoxy injection resin and sealer formulated for ultra-deep penetration for high-strength bonding of very fine cracks.
• Sonneborn Concresive® Standard LVI :: a two-component moisture-insensitive 100% solids low-viscosity epoxy adhesive. It penetrates cracks and voids, bonding hardened concrete to hardened concrete.
• Sonneborn Concresive® 1420 :: a two-component 100% solids nonsag epoxy adhesive.
• Polytuff P-Tuff™ Crack Filling System :: Alone or in conjunction with various proportions of fine rubber granules may be used as a caulking or crack-filling compound, cures faster than conventional urethane caulks.
• Anvil Bond

Surface Repair

• Sonnopatch 100/FS :: Sonopatch® FS is a fast-setting polymer-modified cementitious repair mortar for horizontal, vertical, or overhead surfaces.
• Masterpatch :: Masterpatch® 95 consists of a 100% reactive modified-aliphatic amine hardener, a liquid epoxy resin-based material, and specially processed and graded metallic aggregate.
• Sonneborn Gel Patch :: Sonocrete® Gel Patch is a lightweight, one-component, high-strength, polymer-modified, silica-fume-enhanced repair mortar.
• 10-60 Rapid Mortar :: a one-component shrinkage-compensated very rapid-setting cement-based mortar. It is designed for horizontal concrete surfaces where high early strength gain is required.
• SET® 45 or Set®45HW (hot weather) :: a one-component magnesium phosphate-based patching and repair mortar.
• Polytuff E-TUFF® Repair & Resloping System :: Environmentally friendly, solvent and T.D.I. free, high performance products for the commercial and institutional markets.
• Aquafin Mortar-IC :: fast-setting crystalline waterproof, repair & sealing mortar.
• Aquafin Mortar-LN :: waterproof cementitious repair & lining mortar.
• Aquafin Mortar-40 :: one-component, cementitious structural repair mortar.
• Aquafin Mortar-CA :: highly corrosion-resistant cementitious liner, calcium aluminate formulation.
• Thoropatch

Structural Repair

• Sonneborn LA40 Repair Mortar :: a one-component shrinkage-compensated micro concrete. It is designed for large volume repairs, including structural elements.
• Masterpatch 240 CR :: Masterpatch® 240 CR repair concrete is a proprietary blend of Portland cement, graded aggregate, and additives.